Lift Material Australia
Unit 2, 73 Beauchamp Road,
Matraville
NSW 2036
Products
ACLA Roller Guides
The ACLA-Roller Guide program includes various models of roller guides designed for high-speed electric and hydraulic lifts. The base supports made of special alloy or steel assuring an excellent stability of the complete roller guide units.
The rollers made of the high-quality polyurethane elastomer ACLATHAN offer the following advantages for the application:
- low rolling resistance
- high loading capacity
- excellent abrasion and wear resistance
- low oscillation on account of high concentricity
- silent running
- maintenance-free
- oil-resistant
- minimum compression set (flattening) after temporary standstill
Adrail – Escalator Handrail Advertising
Escalator handrail advertising is an exciting and innovative way to put your message in the hands of millions. When given an option 80% of the public use escalators opposed to stairways, with an average duration of 30 seconds in transit. Studies have shown an impressive 54% of escalator passengers recalled the brand name advertised on ADRail.
- Vibrant Colours
- High Resolution
- Maximum Coverage Glossy Finish
- Antimicrobial
- Durability UV Stability
- Easy Maintenance
- Quick Installation/Removal
AMRail – Antimicrobial Escalator Handrail
Globally, escalator handrails are often listed among the top ten surfaces where the public is directly exposed to germs and other harmful bacteria. Antimicrobial handrails are equally important for passenger safety, as holding the handrail is one of the best ways to defend against accidental falls. AMRail not only defends passengers, it prevents the accelerated growth of bacteria that can cause product deterioration.
- 70% of consumers stated that they would be more likely to hold a handrail that was antimicrobial
- Effective, non-toxic & durable.
- Recyclable
Atwell Governor
As a primary component in the safety of the lift, the existing over speed governor should comply with the current standards in operation and accuracy and if there is any doubt then they should be replaced.
The new VG OSG is designed to meet the requirements of: BS EN81-1:1998+A3:2009 – safety Rules for the construction and installation of lifts: Section: 9.9 – Overspeed governor BS EN81-80:2003 – Safety rules for the construction and installation of lifts – Existing Lifts – Part 80: Rules for improvement of safety of existing passenger and goods passenger lifts.
Significant Hazard number 50 – No, or inadequate safety gear and/or overspeed governor of electric lifts. Clause No. 5.9.2, priority level “High”.
This VG OSG governor can be used to full fill the following requirements of EN81-1:1998+A3:2009: Section 9.8 – Safety Gear Section 9.9 – Overspeed Governor
It will also provide the means to comply with sections Section 9.10 – Ascending car overspeed protection means Section 9.11 Protection against unintended car movement
When used with other VG safety products it will provide full compliance with all the latest regulations of EN81-1:1998+A3:2009
Visit Website: Atwell International
Atwell Rope Brake
The VG rope brake is a versatile unit that can be used as either a single or bi directional brake and is CE certified by BSI.
The brake operates on the lift ropes and is designated as a “movement prevention” or “speed reducing” means in compliance with EN81-1 1998 clause 9.10. The VG rope brake combines the proven technology of “drop-jaw” type governors with the patented VG linkage mechanism. The brake operates in a similar manner to a VG safety gear except that it has one fixed jaw and one moveable jaw or “drop-jaw”.
- Provides over-speed protection in both directions
- Prevents uncontrolled movement of the lift with doors open when used with a UMD-SRB01 controller
- Can be mounted either side of the traction sheave in any position – horizontally, vertically, at any angle and even inverted
- Its electromechanical design means it is fail-safe
Atwell Safety Gears
VG Safety Gears consist of a pair of end assemblies, which can bolt directly to the buffer channels or car frame. Each end assembly has two spring loaded linkage mechanisms, which carry and engage the friction gibs. The linkage mechanisms are designed to centralise the safety gear when it is engaged. This feature, in conjunction with large running clearances, means that VG Safety Gears can be used with spring loaded roller guide shoes, sliding shoes or solid rollers.
- 6 mm running clearance both sides – suitable for roller guide shoes or sliding shoes
- Certified for both lubricated and dry rails on class one guide rails
- All single models can be duplexed to double their braking capacity
- VG safety gears can be inverted to prevent “upward falling”. Either tandem mounted or separately mounted
Automatic Folding Car Doors
We supply all models of Fermator Automatic Folding Car Doors for residential lifts.
- High performance rollers and guide shoes
- Smooth performance
- High reliability of all components
Beam Sensors
The VG Beam & Mini Beam sensors provide an accurate and reliable solution for controlling the load in all types of lifts. It’s unlimited capacity makes it the perfect solution for installations with extremely high loads.
- accurate and reliable solution for controlling the load in all types of lifts
- unlimited capacity
Bedframe CCP Sensor
The CCP sensor provides an alternative solution for controlling the load in installations where it is not possible to install other devices.
The fact that this device can be used with all types of roping 1:1, 2:1 & 4:, make it a good alternative solution in complicated installations.
Two different versions CCP-2000 and CCP-4000 for 2000Kg and 4000Kg loads.
- Calibration with test weights
- High capacity.
Blain Accessories
We supply full range of spare parts and accessories for Blain hydraulic equipment including coils, seal kits, flow guides, solenoids, adjustment screws, pressure switches and many more.
Visit Website: Blain Hydraulics
Blain Door Lock
The L10 pressure lock value is a solenoid operated check valve designed for the hydraulic elevators and includes a self closing manual lowering valve. Its purpose is to allow free flow of oil from the pump unit to the cylinder for upward travel and to prevent flow in the reverse direction from the cylinder to the pump unit until and electrical signal is given to the solenoid.
- designed for the hydraulic elevators
- includes a self closing manual lowering valve
- allow free flow of oil from the pump unit to the cylinder for upward travel
- prevent flow in the reverse direction from the cylinder to the pump
Blain EV100 Valve Block
Blain valves for hydraulic lifts – excellence in simplicity and performance.
Visit Website: Blain Hydraulics
Blain EV4 Valve Block
The BLAIN EV4-vvvf program includes the widest range of VVVF solutions offered to the elevator industry for high performance passenger elevators. Easy to install, EV4‘s are smooth, reliable and precise in operation throughout extreme load and temperature variations with inbuilt overload protection and different energy saving modes. The EV4 system uses the control of L1000H VVVF drive in the up travel, while down travel is managed by the EV4 valve itself. In this way, the EV4-VVVF solution offers the most cost effective and energy-efficient solution.
- widest range of VVVF solutions
- easy installation
- inbuilt overload protection
- different energy saving modes
- cost effective and energy-efficient solution
Blain Flow, Pressure & Temperature Sensor
nstalled in the cylinder line between the control valve and the ball valve, the Q10 Flow Meter measures the rate of flow of hydraulic fluid to and from the cylinder. According to the ram size, accurate measurement of car speeds including accelerations, decelerations and stops are assessed by the electronic card, fed to the PC / Laptop and displayed as travel-graphs. Any irregularity of the movement of the car, such as over-speeding, prolonged leveling or abrupt start and slow down movements indicating potential problems can be registered on site or can remotely monitored through modem connection. Printouts of the results provide valuable records of the installation. Sensors for registering system pressure and temperature are optional.
- measures the rate of flow of hydraulic fluid to and from the cylinder
- accurate measurement of car speeds including accelerations, decelerations and stops are assessed by the electronic card
- any irregularities are viewed via PC/laptop
- registered on site or remotely monitored via modem
Blain Hand Pump
H11 and H12 pumps are for application with hydraulic lifting or pressing equipment for emergency operation of hydraulic elevators and for the pressure testing of hydraulic systems in general. The H11 is constructed for side mounting and the H12 is fitted with a base plate for separate application.
Visit Website: Blain Hydraulics
Blain Rupture Valve
The R10 rupture valve can be mounted in any position directly onto the cylinder inlet.
In the event of failure in the main cylinder line or where the down speed exceeds allowable limits, the R10 valve closes and brings the car to a smooth stop.
Visit Website: Blain Hydraulics
Blain SEV Valve Block
Blain valves for hydraulic lifts – excellence in simplicity and performance.
Visit Website: Blain Hydraulics
BrandRail
Custom. Unique. Permanent. Our BrandRail handrails offer a permanent branding solution for logos, safety messages or graphics. Whether applied to EHC’s black antimicrobial handrails, or custom colour choices, BrandRail is sure to capture an audiance
- Endless personalisation possibilities
- State of the art digital printing process produces rich colours.
- Permanent branding solutions
C100 Emergency Telephone
The Memco C100 Emergency Telephone system has been designed to provide quick and easy COP installation. It is also the first Emergency Telephone that can be programmed at the touch of a button, making the installation and programming process quicker and easier than ever.
- One-touch Programming
- Removable programming unit
- Available in behind COP (BASE), Surface Mount or Flush Mount
- Allows full compliance with EN81-28 and EN81-70
- Connect up to 8 C100 units to the same phone line
- Up to 4 alarm numbers and a technical alarm
- Memco ETR Software – for easy management of emergency, technical and EN81-28 autotest calls.
Cabin
The CAB load weighing system provides the most precise solution for controlling the load in any type of lift. It’s automatic calibration and unparalleled accuracy makes it the perfect solution for new installations. These sensors are used in conjunction with the LM3D control box.
- precise solution for controlling the load in any type of lift
- automatic calibration
- unparalleled accuracy
- sensors are used in conjunction with the LM3D control box.
Comb Plates
Lift Material can supply comb plates for a large range of escalator models and can be supplied with either powder coated or aluminium finishes. With a range of sizes, applications and compositions available, please contact us for pricing and availability.
- Large range of options
- Aluminium, powder coated and painted finishes available
- Thyssenkrupp, Otis, Schindler, Kone, SJEC
Control Box
Universal electronic control unit.
The LM3D universal control unit is the most complete control unit which has all the possible options available.
This control unit can be used with any sensor manufactured by Micelect.
Visit Website: Micelect
D-Flector Brushes
EHC’s D-Flector brush has been designed to stringent quality and safety specifications and is suited to a wide range of escalators and moving walks, while meeting global escalator safety code requirements. The flexible spine also allows for easy removal for regular maintenance of the escalator.
EHC’s D-Flector kits consist of four primary components:
- Brush Holder
- Brush Section
- End Caps
- Alignment Insert
D-Flex Safety Brushes
The D-Flex Safety Brushes conform quickly to any escalator profile on-site and are designed to meet global safety standards. These Safety Brushes are proven to increase passenger awareness while greatly reducing the risks of step and skirt entrapments. By creating a physical barrier between passengers and moving escalator components, serious injury can be prevented.
- A17 Code Compliant.
- Only 1 Measurement Required.
- Attractive & Highly Durable.
- Unique One-Piece Design.
- Easy To Order & Install.
Demi-Cube Glass Lift ID Lantern
The Demi-Cube is a glass lift ID hall lantern available in frosted glass, black glass and white glass. Intended for use in conjunction with destination control systems, it offers clear lines, clear visuals and a flush-to-wall mounting.
The Demi-Cube is manufactured entirely from low iron glass that gives a luxurious velvety surface finish for a diffuse glow in operation and a soft, plush appearance when unlit. The glass is toughened providing a more robust and safer product.
Visit Website: Dewhurst
Digital Audio Unit
The Memco Digital Audio Unit (DAU) is mounted behind the car operating panel (COP) and works when connected to the Digital Communication Platform (DCP). The DAU is connected to the DCP by a 4-wire CAN Bus which provides power and communication including powering the lift alarm.
The digital connection between the DAU and the Digital Communications Platform provides high audio quality compared with analogue telephone solutions, even over 400m of cable.
- High digital audio quality
- Car operating panel (COP) mounted and a PIT variant is also available
- Compact mechanical footprint
- Easy to install
- 4-wire connection to Digital Communications Platform
- Supported by Digital Communications Platform
- Optional inductive loop accessory
- CAN or serial connections
- EN81-28 and EN81-70 compliant
Digital Communication Platform
The Digital Communication Platform is the heart of the communications system combining a GSM gateway, lift emergency telephone and M2M gateway in a single unit. The M2M capability allows remote configuration of all connected devices and the extraction of lift monitoring data; typically only achievable via the installation of a new lift controller.
With over two-hundred thousand installations within a single territory and a nine-year track record, the Memco DCP is your proven and reliable route to optimised lift maintenance management and is backed with a two-year warranty.
- Provides a two-way data link
- Quick and easy installation using the Avire Hub
- CAN and RS-232 connections for lift controller
- Opens up the possibilities to remotely program and monitor many aspects of your lifts
- 4G DCP (either single or dual SIM version)
Elevator Light Curtain Accessories
- Clamp plate is used to attach an Ultraslim detector to the slampost or can be used if the return of the door is not long enough to screw through. A set of 5 clamp plate assemblies is used to fix a single detector.
- Static fixing kit contains all the brackets and fixings necessary for installing a set of slim profile detectors in a fixed position at either end of the lift car sill.
- The 'Igus Chain' is a snap open energy chain, placed around the extension cable to protect the detector cables from clamping when installed in a dynamic installation.
- 4m extension leads are available for all light curtain models E-series, Pana40+ and Panachrome.
Elmo Submersible Motor
Submersible electric motors for hydraulic lifts.
Visit Website: Elmo
ELSCO Accessories
Genuine Elsco roller wheels are the contractor’s best option for replacement parts for original Elsco equipment. No other aftermarket replacement roller offers the same combination of superior materials, precision engineering and quality control.
- Neoprene rubber roller wheels
- Precision ball bearings
- Eccentric wheel axle bolts
- Durable structural components
ELSCO Express 3 Guides
The Express-3 Roller Guide represents a groundbreaking combination of elevator ride quality, value, and ease of use.
The culmination of a half-century of ELSCO expertise in improving ride quality, the 10-inch Express-3 utilizes a patented shock absorbing pivot bearing to isolate the elevator cabin and its occupants from uneven or misaligned rails. The result is a compact, light-weight roller guide that is the ideal choice for high-speed applications where low noise and a first-class ride are of the utmost importance.
The ELSCO Express-3 is covered under U.S. Patent no. 7,562,749.
- 10 inch roller wheels
- Innovative elastomeric bearings
- Neoprene rubber roller wheels
- Precision ball bearings
- Fully adjustable stabilising springs
- Independent adjustable stops
- Durable structural components
ELSCO Express 6 Guides
The Express-6 Roller Guide is the ultimate solution for the most demanding elevator applications. Engineered for use on elevatorsthat “push the envelope,” the rugged design and heavy construction of the Express-6 make it ideal for the very fastest elevators, and those with extremely challenging loads.
The Express-6 is typically used on very high-capacity, very high-speed cars, such as observation shuttles in very tall buildings. Its striking size and design have also made it an architectural element in more conventional elevator installations with exposed hoistways.
- Six wheel construction
- Ten-inch roller wheels
- Neoprene rubber roller wheels
- Precision ball bearings
- Fully adjustable stabilizing springs
- Adjustable stops
- Durable structural components
ELSCO Flex Mount
ELSCO’s new Flex-Mount adapter plates are designed to flexibly allow ELSCO roller guides to mount on a wide variety of elevator bolt patterns. There is no need to take accurate measurements, create drawings, or fabricate custom parts or wait for long fabrication lead times. This unique and easy solution minimizes elevator downtime and saves you valuable time and money.
Visit Website: ELSCO
ELSCO Model A Guides
The Model A roller guide has been the elevator industry’s gold standard for Elevator ride quality for over 45 years. Its outstanding performance, rugged durability and extended application range make it our flagship product.
Model A roller guides are designed with a number of features that provide superior riding characteristics. Spring-loading in all directions and our unique “walking beam” design compensate for adverse operating conditions, bumps, and vibration. Simple adjustment procedures allow for customization to the specific challenges of the installation.
- Six wheel construction
- Neoprene rubber roller wheels
- Precision ball bearings
- Fully adjustable stabilizing springs
- Adjustable stops
- Durable structural components
ELSCO Model B Guides
The Model B Roller Guide offersexceptional performance in a compact, easy-to-install package. A broad application range, ease of use, and outstanding value have made the Model B our most popular roller guide.
Typically used on moderate-speed, moderate-capacity elevator cabins, the Model B is equipped with a number of ride-improving features that have made it the preferred choice of so many elevator contractors around the world.
- Neoprene rubber roller wheels
- Precision ball bearings
- Fully adjustable stabilizing springs
- Adjustable stops
- Durable structural components
ELSCO Model C Guides
The Model C Roller Guide is unique in its suitability to a wide variety of elevator applications. It is primarily intended as the counterweight partner to the Model A. Yet it is also approriate for use on elevator cabs where the ride quality advantages of six-wheel construction are needed, or where a smaller roller is required for clearance, such as in corner post applications.
- Six wheel construction
- Neoprene rubber roller wheels
- Precision ball bearings
- Fully adjustable stabilizing springs
- Adjustable stops
- Durable structural components
