Lift Material Australia
Unit 2, 73 Beauchamp Road,
Matraville
NSW 2036
Products
Blain EV4 Valve Block
The BLAIN EV4-vvvf program includes the widest range of VVVF solutions offered to the elevator industry for high performance passenger elevators. Easy to install, EV4‘s are smooth, reliable and precise in operation throughout extreme load and temperature variations with inbuilt overload protection and different energy saving modes. The EV4 system uses the control of L1000H VVVF drive in the up travel, while down travel is managed by the EV4 valve itself. In this way, the EV4-VVVF solution offers the most cost effective and energy-efficient solution.
- widest range of VVVF solutions
- easy installation
- inbuilt overload protection
- different energy saving modes
- cost effective and energy-efficient solution
Blain Flow, Pressure & Temperature Sensor
nstalled in the cylinder line between the control valve and the ball valve, the Q10 Flow Meter measures the rate of flow of hydraulic fluid to and from the cylinder. According to the ram size, accurate measurement of car speeds including accelerations, decelerations and stops are assessed by the electronic card, fed to the PC / Laptop and displayed as travel-graphs. Any irregularity of the movement of the car, such as over-speeding, prolonged leveling or abrupt start and slow down movements indicating potential problems can be registered on site or can remotely monitored through modem connection. Printouts of the results provide valuable records of the installation. Sensors for registering system pressure and temperature are optional.
- measures the rate of flow of hydraulic fluid to and from the cylinder
- accurate measurement of car speeds including accelerations, decelerations and stops are assessed by the electronic card
- any irregularities are viewed via PC/laptop
- registered on site or remotely monitored via modem
Blain Hand Pump
H11 and H12 pumps are for application with hydraulic lifting or pressing equipment for emergency operation of hydraulic elevators and for the pressure testing of hydraulic systems in general. The H11 is constructed for side mounting and the H12 is fitted with a base plate for separate application.
Visit Website: Blain Hydraulics
Blain Rupture Valve
The R10 rupture valve can be mounted in any position directly onto the cylinder inlet.
In the event of failure in the main cylinder line or where the down speed exceeds allowable limits, the R10 valve closes and brings the car to a smooth stop.
Visit Website: Blain Hydraulics
Blain SEV Valve Block
Blain valves for hydraulic lifts – excellence in simplicity and performance.
Visit Website: Blain Hydraulics
BrandRail
Custom. Unique. Permanent. Our BrandRail handrails offer a permanent branding solution for logos, safety messages or graphics. Whether applied to EHC’s black antimicrobial handrails, or custom colour choices, BrandRail is sure to capture an audiance
- Endless personalisation possibilities
- State of the art digital printing process produces rich colours.
- Permanent branding solutions
C100 Emergency Telephone
The Memco C100 Emergency Telephone system has been designed to provide quick and easy COP installation. It is also the first Emergency Telephone that can be programmed at the touch of a button, making the installation and programming process quicker and easier than ever.
- One-touch Programming
- Removable programming unit
- Available in behind COP (BASE), Surface Mount or Flush Mount
- Allows full compliance with EN81-28 and EN81-70
- Connect up to 8 C100 units to the same phone line
- Up to 4 alarm numbers and a technical alarm
- Memco ETR Software – for easy management of emergency, technical and EN81-28 autotest calls.
Cabin
The CAB load weighing system provides the most precise solution for controlling the load in any type of lift. It’s automatic calibration and unparalleled accuracy makes it the perfect solution for new installations. These sensors are used in conjunction with the LM3D control box.
- precise solution for controlling the load in any type of lift
- automatic calibration
- unparalleled accuracy
- sensors are used in conjunction with the LM3D control box.
Comb Plates
Lift Material can supply comb plates for a large range of escalator models and can be supplied with either powder coated or aluminium finishes. With a range of sizes, applications and compositions available, please contact us for pricing and availability.
- Large range of options
- Aluminium, powder coated and painted finishes available
- Thyssenkrupp, Otis, Schindler, Kone, SJEC
Control Box
Universal electronic control unit.
The LM3D universal control unit is the most complete control unit which has all the possible options available.
This control unit can be used with any sensor manufactured by Micelect.
Visit Website: Micelect
D-Flector Brushes
EHC’s D-Flector brush has been designed to stringent quality and safety specifications and is suited to a wide range of escalators and moving walks, while meeting global escalator safety code requirements. The flexible spine also allows for easy removal for regular maintenance of the escalator.
EHC’s D-Flector kits consist of four primary components:
- Brush Holder
- Brush Section
- End Caps
- Alignment Insert
D-Flex Safety Brushes
The D-Flex Safety Brushes conform quickly to any escalator profile on-site and are designed to meet global safety standards. These Safety Brushes are proven to increase passenger awareness while greatly reducing the risks of step and skirt entrapments. By creating a physical barrier between passengers and moving escalator components, serious injury can be prevented.
- A17 Code Compliant.
- Only 1 Measurement Required.
- Attractive & Highly Durable.
- Unique One-Piece Design.
- Easy To Order & Install.
