Showing all 10 results

C100 Emergency Telephone

The Memco C100 Emergency Telephone system has been designed to provide quick and easy COP installation. It is also the first Emergency Telephone that can be programmed at the touch of a button, making the installation and programming process quicker and easier than ever.
  • One-touch Programming
  • Removable programming unit
  • Available in behind COP (BASE), Surface Mount or Flush Mount
  • Allows full compliance with EN81-28 and EN81-70
  • Connect up to 8 C100 units to the same phone line
  • Up to 4 alarm numbers and a technical alarm
  • Memco ETR Software – for easy management of emergency, technical and EN81-28 autotest calls.
Visit Website: Memco

Digital Audio Unit

The Memco Digital Audio Unit (DAU) is mounted behind the car operating panel (COP) and works when connected to the Digital Communication Platform (DCP). The DAU is connected to the DCP by a 4-wire CAN Bus which provides power and communication including powering the lift alarm. The digital connection between the DAU and the Digital Communications Platform provides high audio quality compared with analogue telephone solutions, even over 400m of cable.
  • High digital audio quality
  • Car operating panel (COP) mounted and a PIT variant is also available
  • Compact mechanical footprint
  • Easy to install
  • 4-wire connection to Digital Communications Platform
  • Supported by Digital Communications Platform
  • Optional inductive loop accessory
  • CAN or serial connections
  • EN81-28 and EN81-70 compliant
Visit Website: Memco

Digital Communication Platform

The Digital Communication Platform is the heart of the communications system combining a GSM gateway, lift emergency telephone and M2M gateway in a single unit. The M2M capability allows remote configuration of all connected devices and the extraction of lift monitoring data; typically only achievable via the installation of a new lift controller. With over two-hundred thousand installations within a single territory and a nine-year track record, the Memco DCP is your proven and reliable route to optimised lift maintenance management and is backed with a two-year warranty.
  • Provides a two-way data link
  • Quick and easy installation using the Avire Hub
  • CAN and RS-232 connections for lift controller
  • Opens up the possibilities to remotely program and monitor many aspects of your lifts
  • 4G DCP (either single or dual SIM version)
Visit Website: Memco

Elevator Light Curtain Accessories

  • Clamp plate is used to attach an Ultraslim detector to the slampost or can be used if the return of the door is not long enough to screw through. A set of 5 clamp plate assemblies is used to fix a single detector.
  • Static fixing kit contains all the brackets and fixings necessary for installing a set of slim profile detectors in a fixed position at either end of the lift car sill.
  • The 'Igus Chain' is a snap open energy chain, placed around the extension cable to protect the detector cables from clamping when installed in a dynamic installation.
  • 4m extension leads are available for all light curtain models E-series, Pana40+ and Panachrome.
Visit Website: Memco

Lift HAWK Sensor

The Lift HAWK is a sensor fitted on the top of the lift car (TOC) which can remotely check the lift status through connection with a Digital Communication Platform (DCP) or Memcom+. Information such as the time of the last lift movement, current door status and time of the last door move can all be remotely tested using this device. The HAWK also self-learns the typical activity of a lift and can autonomously perform lift tests in periods of prolonged inactivity.
  • Remotely test the lift status without having to connect to the lift controller
  • Self-learning sensor performs autonomous tests when usage patterns are not typical
  • Real-time monitoring through the Avire Hub
  • Saves time and cost of visiting site for false call outs
  • CAN or serial connections
  • Compact mechanical footprint
  • Quick and easy to install
Visit Website: Memco

Light Rays – E-Series

The Memco E-Series is ideal for customers who require the excellent performance and quality expected of any Memco product but who do not require any additional features. It is designed with flexibility in mind, and is suitable for both integration into new elevators and for elevator maintenance or elevator refurbishment of existing installations. EN81-20 compliant versions of the E-Series are currently available. These versions may include a second, diagnostic output. E-Series is available with a variety of different profiles and fixing kits, suitable for any static or dynamic application. It may be wired directly into the elevator door controller or via an external power supply.
  • EN81-20 compliant versions available
  • Profile and fixing kit options suitable for any installation
  • External power supply available with plug-and-play design
  • Diagnostic LED
  • Aluminium profile
Visit Website: Memco

Light Rays – Pana40 Plus 2D/3D

Memco Pana40 Plus is the most established light curtain within the Memco range and is renowned for being an exceptionally high quality, durable and reliable solution. Memco Pana40 Plus exceeds EN81-20 lift standard compliance with detection up to a height of 1.8m. It can be configured to support either 40 or 194 Infra-red beams, and comes in a range of profiles with fixing kits suitable for any installation. The Pana40 Plus is also available with 3D detection – ideal for high-traffic and high-risk applications.
  • EN81-20 compliant detector
  • 40 parallel or 194 criss-cross beams offer protection to a height of 1.8m
  • 3D detection extends protection into the landing area
  • Profiles and fixing kits suitable for any installation
  • Extended operating range
  • External controller for quick setup and configuration
Visit Website: Memco

Light Rays – Panachrome 2D/3D

The Memco Panachrome elevator light curtain is a true innovation in elevator door sensors. It includes coloured indicators which operate on door movement; a feature that has been proven to enhance passenger safety and to reduce door damage. It is also available with elevator door sensors that use 3D detection extending passenger protection into the landing area. Panachrome offers a unique combination of improved safety, enhanced aesthetics and cost reduction, and is therefore ideal for premium and high-traffic applications.
  • Complies with EN81-70 legislation – Disability Discrimination Act
  • Coloured red/green indicators highlight door movement
  • 2D and 3D detector models available
  • 2D Coverage exceeds minimum requirements of 25mm to 1800mm
  • Dense infra-red 154 beam light curtain
  • Suitable for centre-opening and sideopening doors
  • Rigid extrusions for easy installation
  • Self-drilling screws for quick installation
Visit Website: Memco

Light Rays – Panachrome Plus 2D/3D

Panachrome+ is an intelligent, unique and premium light curtain that offers advanced door and passenger protection by showing door movement with red and green coloured LEDs. This premium light curtain is available with 3D detection and our latest version can be monitored remotely using our cloud platform the Avire Hub.
  • Complies with EN81-20 and EN81-70 legislation
  • CAN Bus connection for connectivity
  • Coloured red/green indicators highlight door movement
  • 2D and 3D detector models available
  • Dense infra-red 234 beam light curtain
  • Suitable for centre-opening and side-opening doors
  • Display and keypad on controller for easy programming
  • 10mm & 43mm profiles available
Visit Website: Memco

Memcom Emergency Telephone

The Memcom elevator emergency phone is a premium product, providing trapped passengers with an easy, high quality, reliable, hands-free connection to emergency help. This Top of car (TOC) unit is provided with a built-in speaker, microphone and backlit LCD display which is used for programming and status information. High quality advanced electronics provide excellent sound, acoustics and reliability.
  • Allows full compliance with EN81-28 and EN81-70.
  • Connect up to 8 Memcom emergency telephone units to the same phone line
  • Up to 4 alarm numbers and 2 technical alarms.
  • Backlit LCD display for programming and status information.
  • Easy programming using a simple tick box system
  • Stand-alone battery back-up of complete system including GSM.
  • Memcom ETR Software – allows easy management of emergency, technical and EN81-28 auto-test calls and the ability to remotely program and re-program installed units.
  • Able to work on VOIP/NGN networks using a VOIP to analogue convertor, or the analogue port on the VOIP master station.
Visit Website: Memco