US95 Plus Pushbutton
The circular shaped US95 Plus Braille Pushbutton meets all the requirements of the visually impaired. The extra large wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background can be either black, providing good contrast with legend and faceplate (US95EN Plus), or stainless steel.
- Extra-large (41mm dia) but still uses Compact Range bodies15mm high tactile legend
- Legend halo illumination
- Vandal resistant with stainless steel front
- EN81-71 cat 2
- Large range of pressel legends in new font
- Standard pressels are a stainless steel plate moulded with red or opal polycarbonate
Visit Website: Dewhurst
Description
Body Type
- Micro movement
- Very shallow <20mm
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Wide range of connector options
- 1 n/o contact only (other options available through a relay board)
- UL/CSA approved
- Shallow
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Spade or screw terminal
- Shunt boards for easy installation
- 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
- UL/CSA approved
- Micro movement
- Shallow, less than 20mm deep
- High grade polycarbonate
- Vandal resistant and durable
- LED current 20mA
- Spade or screw terminal
- Push in Wago connectors
- Cable size up to 0.75mm2
- 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
- UL/CSA approved
Click options above for more detail
Material Finish
Brushed Stainless Steel
Mirror Stainless Steel
Brushed Brass
Mirror Brass
Illumination Colour
Red
Yellow
Green
Blue
White
Amber option also available
Illumination Action
- Before call acceptance – Both legend and halo are NON illuminated
- After call acceptance – Both legend and halo illuminated at FULL brightness any colour
- Before call acceptance – Both legend and halo are DIM illuminated any colour.
- After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.
Note: DIM and FULL brightness are the same colour.
- Before call acceptance – Both legend and halo are DIM illuminated white.
- After call acceptance – Both legend and halo illuminated at FULL brightness with any available colour.
Note: Due to DIM colour (white) adding to FULL brightness colour. FULL colour is not quite the same as FULL Single or Dual, as colour can be slightly lighter.
- Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour.
- After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour.
Note: BACKGROUND and FULL brightness colours, can be any available colour and different to one another.
Click options above for more detail
Product Enquiry
Additional information
| Brand |
Dewhurst |
|---|
Related products
M-20 REB Pushbutton
The M-20 REB pushbutton with Braille has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and the pressel, with the added advantage of Standard English Braille. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
- No studding required
- Separate legend and halo illumination
- Large range of pressel legends
- High contrast ratio between pressel and legend
- 15mm high tactile legend + Braille (Moulded through)
- Meets EN81-70
US95 Pushbutton
The circular shaped US95 Braille Pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background can be either black, providing good contrast with legend and faceplate (US95EN), or stainless steel.
- 15mm high tactile legend with Braille
- Legend and halo illumination
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
US95-EN Plus Pushbutton
The circular US95-EN Braille Pushbutton meets all the requirements of the visually impaired. The extra-large (41mm dia) tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background is black, providing good contrast with legend and faceplate and meets the requirement of EN81-70.
- Extra-large (41mm dia) but still uses Compact Range bodies
- 15mm high tactile legend
- Legend halo illumination
- Meets EN81-70
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends in new font
- High Contrast between pressel and legend
- Standard pressels are black anodized plate moulded with opal polycarbonate
US95-EN Pushbutton
The circular US95-EN Braille Pushbutton meets all the requirements of the visually impaired. The Braille dots below the legend are Standard English Braille. The pressel background is black, providing good contrast with legend and faceplate and meets the requirement of EN81-70.
- 15mm high tactile legend
- Legend halo illumination
- Meets EN81-70
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends in new font
- High Contrast between pressel and legend
- Standard pressels are black anodized plate moulded with opal polycarbonate
US97-EN Pushbutton
The US97-EN Pushbutton has been designed tomeet the requirements of EN81-70 and pr EN81-40/41 which requires the pushbutton legend to have a height of 15mm. The pushbutton benefits from a brightly illuminated white legend for easy viewing in darkness as well as daylight.
- 15mm tactile legend
- High contrast between legend and pressel
- Legend & halo illumination can be controlled individually
- Large range of pressel legendsVandal resistant and weatherproof
- Meets EN81-1/2, EN81-70, EN81-72, EN81-73, EN60529 (IP66 & IP67)
US100 Pushbutton
The US100 Pushbutton is the most vandal resistant of the pushbuttons within our range. The stainless steel pressel is set within a stainless steel bezel, which it bottoms out on, making it highly resistant to impact attacks. Illumination is provided through a small insert moulded lens in the centre of the button. Although the US100 is extremely vandal resistant, its clean lines have made it very popular and it has been used in some of the most prestigious installations around the world as well as some of the harshest.
- Classic design
- Highly vandal resistant exceeds EN81-71 category 2
- Pressel/surround assembly is locked to the faceplate
US89 Pushbutton
The timeless design of the US89 Pushbutton has proven to be very successful over the years. The obround shape is a refreshing alternative to the more common round or square shape.The US89 is available with Compact 2, Compact 3 or Compact 3P bodies.
The illuminated tactile legend clear identification and the button can be illuminated in a wide variety of colours.
- 13mm high tactile legend
- Legend & halo illumination
- Vandal resistant with stainless steel front EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
US90 Pushbutton
The US90 Pushbutton offers a clean square frontal appearance that will enhance any lift. The US90 is based on our original US81 Pushbutton and is particularly durable with reliability assured in even the harshest of conditions.
The illuminated legend provides clear identification and the button can be illuminated in a wide variety of colours.
- 13mm high flush legend
- Legend and halo illumination
- Vandal resistant with stainless steelfront EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or opal carbonate
US90-15 Pushbutton
The US90-15 Braille Pushbutton meets all the requirements of the visually impaired. As well as the 15mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The illuminated tactile legend provides clear identification and the button can be illuminated in a wide variety of colours.
- 15mm high tactile legend with Braille
- Legend and halo illumination
- Vandal resistant with stainless steel front EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
US91 Pushbutton
The US91 Pushbutton is a classic circular button with a clean timeless appearance. The illuminated legend provides clear identification and the button canbe illuminated in a wide variety of colours.
- 15mm high tactile legend
- Legend and halo illumination
- Vandal resistant with stainless steel front EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
US91-EN Pushbutton
The US91-EN Pushbutton is a classic circular button designed to meet the requirements of EN81-70. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the legend itself illuminates brightly and you have the choice of many colour options.
- 15mm high tactile legend
- High contrast between legend and pressel
- Legend and halo illumination
- Vandal resistant EN81-71 cat 2
- Large range of pressel legends
- Standard pressels are a black plate moulded with opal polycarbonate
US96-EN Pushbutton
The square shaped US96-EN Braille pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel back ground is black, providing good contrast with legend and faceplate and meets the requirements of EN81-70.
- 15mm high tactile legend with Braille
- Legend and halo illumination
- Vandal resistant EN81-71 cat 1
- Large range of pressel legends
- High contrast ratio between pressel and legend
- Standard pressels are a black plate moulded with grey polycarbonate
Lift Material Australia
Unit 2, 73 Beauchamp Road,
Matraville
NSW 2036
© 2023 Lift Material Australia – All Rights Reserved
Australian Business Number 31 114 293 702
Lift Material Australia
Unit 2, 73 Beauchamp Road,
Matraville
NSW 2036
© 2023 Lift Material Australia
All Rights Reserved
Australian Business Number 31114293702