SWT Limit Switch
This geared limit switch is for use in light and medium-duty applications where it is necessary to limit reciprocating motion. The point at which the switch operates is precisely and easily adjustable by means of a special microsetting device.
Available versions:
- Left-hand, gear ratio 36:1 001003-020000
- Right-hand, gear ratio 36:1 001003-010000
- Right-hand, gear ratio 115:1 001003-030000* – only available from Storth Ltd Tel: 01524 781 900
- Others available from stock. Call for details.
Visit Website: Dewhurst
Description
Note on handing: Viewing from the back, if the shaft protrudes to the right. Then the switch is right hand. Pictures shown on this page is for a right hand unit. The gear ratio is shown on the gear box on the back.
- Gear limit switch for use in light/medium duty applications
- The point at which the switch operates is precisely and easily adjustable by means of a special micro setting device
Product Enquiry
Additional information
| Brand |
Dewhurst |
|---|
Related products
Giovenzana Limit Switches
Giovenzana limit switches are the best that the could offer in terms of technology and performance. They satisfy the most various needs by covering application fields in the automation sector, lifts and general machinery.
NC Contacts with positive opening and different contact combinations, quick switch, slow or overlapping.
Visit Website: Giovenzana
Kronenberg Interlocks and Switches
Kronenberg offers door locks in various designs for a wide variety of applications and optionally with integrated monitoring of the emergency release according to EN 81-21.
An extensive range of accessories complements the respective standard devices for single and double-leaf doors.
The quality and innovation of the products made by Kronenberg GmbH one of the leading suppliers of switches in elevator industry.
- Robust fine silver contacts guarantee safe and reliable contact making
- Maintenance-free due to long-life lubricants
- Extensive range of accessories
- Large diversity of variants
- Quiet functioning
Gatelocks VL10 VL20 & VL30
For use on lift landings, Dewhurst gatelocks are robustly designed dual-contact locks, with pre-locking features. The VL10/11/20 and VL21 are use with collapsible gates or sliding doors; the VL30/31 with single swing doors. The gate locks are used in conjunction with a suitable retiring ramp (such as the Dewhurst Type FR21) and are adaptable for either right-hand or left-hand operation.
- Available from stock (left or right-hand options)
- Robustly designed dual-contact lock
- The VL10/20/30 locks now comply with the requirements of BS EN81-20:2014 & BS EN81-50:2014 as per Lift Directive 2014/33/EU for Landing Door Locking Devices
- IP Rating: IP20
- Can be used with the Dewhurst FR21 Retiring Ramp
VC40 Limit Switch
The rugged, low cost VC40A switch is used with a suitable operating ramp, to limit the travel of electric lifts and skiphoists etc. requiring accurate positioning at low speeds. It is supplied with normally-closed contacts and an earth safety screen.
- Ideal for low speed final limit switch
- 1 normally close (1N/C)Contact rating 5A @ 240Vac or 2A @ 240Vdc
- Meets EN81-1 1998
- CSA and other recognised standards
- Available from stock
- Rugged, low cost switch
VC50 Limit Switch
This rugged, competitively priced VC50 switch is used with a suitable operating ramp to limit the travels of electric lifts and ship hoists. It is supplied with one normally open and one normally closed contact.
- Ideal for final limit switch or slowing switch
- 1 normally close and 1 normally open contact (1N/C+1N/O)
- Contact rating 3A @ 240Vac or 0.5A @ 240Vdc
- Available from stock
- Rugged, low cost switch
Car Gate Switch
CGS is for incorporation in the interlocking circuits of collapsible gates or sliding doors of lift cars.
- For incorporation in the interlocking circuits of collapsible gates or sliding doors of lift cars
- Meets EN81-1 1998
- 1 normally open contact (1NO)
- Contact rating 2A @240Vac
EM21 Proximity Switch
The EM21 is designed to provide car position signals in the control of electric and hydraulic lifts and elevators. It is a rugged and heavy duty switch, small enough to fit within the overall depth of standard T guides. The EM21 is rated to IP32.
Switch rating:
- 10 Watts @250Vdc (non-inductive)
- 10VA @240Vac RMSmaximun current 1A @ 250V
- Provides car position signals in the control of electric and hydraulic lifts
- Rugged and heavy duty switch
- Provides car position signals in the control of electric and hydraulic lifts
- Rugged and heavy duty switch
- Switch rating: 10 Watts @250Vdc (non-inductive) and 10VA @240Vac RMSmaximun current 1A @ 250V
- Life expectancy >12M operations
- Repeat accuracy: 1.6mm in 10M operations
- Speed range: 0.01m/sec to 2.5m/sec or 2ft/min to 500ft/mim
VF20 (Coffin) Safety Switch
The VF20, or Coffin Safety Switch is designed to be incorporated in pilot interlocking and safety circuits of control equipment. Contact ratings available as 200Watt max @ 240Vdc 2A (non-inductive), 200Watt max @240Vdc 1A (inductive) or12KVA max 440Vac RMS 5A max.
- Wide range of applications
- Silver-to-silver contacts
- Positive break (safety contact)
FR21 Retiring Cams
FR21 is designed to prevent landing doors or gates being snatched open whilst the lift car is passing through a LOCK zone at intermediate floors. Used in Dewhurst prelocking lift systems it also ensures that the landing door mechanism has functioned correctly before the car is allowed to move away.
- Available from stock
- Robustly designed
- Fabricated steel ramp
- Designed to work with Dewhurst VL gatelock range
- Wide range of coil voltages available (see data sheet below)
RKMO / EMT17_18 Retiring Cams
Retiring cams are designed to prevent landing doors or gates being snatched open whilst the lift car is passing through a LOCK zone at intermediate floors.
Both motorized and electromagnetic retiring cams suitable for various AC/DC operation voltages are available for a wide variety of applications.
- High actuation force
- Energy-Saving Due To The Low Current Requirement
- Low Noise
- All Steel Parts Galvanized
- Automatic Switchover To Reduced Holding Current
- Robust And Precise
