Lift Material Australia
Unit 2, 73 Beauchamp Road,
Matraville
NSW 2036
Elevator Products
Blain Hand Pump
H11 and H12 pumps are for application with hydraulic lifting or pressing equipment for emergency operation of hydraulic elevators and for the pressure testing of hydraulic systems in general. The H11 is constructed for side mounting and the H12 is fitted with a base plate for separate application.
Visit Website: Blain Hydraulics
Blain Rupture Valve
The R10 rupture valve can be mounted in any position directly onto the cylinder inlet.
In the event of failure in the main cylinder line or where the down speed exceeds allowable limits, the R10 valve closes and brings the car to a smooth stop.
Visit Website: Blain Hydraulics
Blain SEV Valve Block
Blain valves for hydraulic lifts – excellence in simplicity and performance.
Visit Website: Blain Hydraulics
C100 Emergency Telephone
The Memco C100 Emergency Telephone system has been designed to provide quick and easy COP installation. It is also the first Emergency Telephone that can be programmed at the touch of a button, making the installation and programming process quicker and easier than ever.
- One-touch Programming
- Removable programming unit
- Available in behind COP (BASE), Surface Mount or Flush Mount
- Allows full compliance with EN81-28 and EN81-70
- Connect up to 8 C100 units to the same phone line
- Up to 4 alarm numbers and a technical alarm
- Memco ETR Software – for easy management of emergency, technical and EN81-28 autotest calls.
Cabin
The CAB load weighing system provides the most precise solution for controlling the load in any type of lift. It’s automatic calibration and unparalleled accuracy makes it the perfect solution for new installations. These sensors are used in conjunction with the LM3D control box.
- precise solution for controlling the load in any type of lift
- automatic calibration
- unparalleled accuracy
- sensors are used in conjunction with the LM3D control box.
Control Box
Universal electronic control unit.
The LM3D universal control unit is the most complete control unit which has all the possible options available.
This control unit can be used with any sensor manufactured by Micelect.
Visit Website: Micelect
Demi-Cube Glass Lift ID Lantern
The Demi-Cube is a glass lift ID hall lantern available in frosted glass, black glass and white glass. Intended for use in conjunction with destination control systems, it offers clear lines, clear visuals and a flush-to-wall mounting.
The Demi-Cube is manufactured entirely from low iron glass that gives a luxurious velvety surface finish for a diffuse glow in operation and a soft, plush appearance when unlit. The glass is toughened providing a more robust and safer product.
Visit Website: Dewhurst
Digital Audio Unit
The Memco Digital Audio Unit (DAU) is mounted behind the car operating panel (COP) and works when connected to the Digital Communication Platform (DCP). The DAU is connected to the DCP by a 4-wire CAN Bus which provides power and communication including powering the lift alarm.
The digital connection between the DAU and the Digital Communications Platform provides high audio quality compared with analogue telephone solutions, even over 400m of cable.
- High digital audio quality
- Car operating panel (COP) mounted and a PIT variant is also available
- Compact mechanical footprint
- Easy to install
- 4-wire connection to Digital Communications Platform
- Supported by Digital Communications Platform
- Optional inductive loop accessory
- CAN or serial connections
- EN81-28 and EN81-70 compliant
Digital Communication Platform
The Digital Communication Platform is the heart of the communications system combining a GSM gateway, lift emergency telephone and M2M gateway in a single unit. The M2M capability allows remote configuration of all connected devices and the extraction of lift monitoring data; typically only achievable via the installation of a new lift controller.
With over two-hundred thousand installations within a single territory and a nine-year track record, the Memco DCP is your proven and reliable route to optimised lift maintenance management and is backed with a two-year warranty.
- Provides a two-way data link
- Quick and easy installation using the Avire Hub
- CAN and RS-232 connections for lift controller
- Opens up the possibilities to remotely program and monitor many aspects of your lifts
- 4G DCP (either single or dual SIM version)
Elevator Light Curtain Accessories
- Clamp plate is used to attach an Ultraslim detector to the slampost or can be used if the return of the door is not long enough to screw through. A set of 5 clamp plate assemblies is used to fix a single detector.
- Static fixing kit contains all the brackets and fixings necessary for installing a set of slim profile detectors in a fixed position at either end of the lift car sill.
- The 'Igus Chain' is a snap open energy chain, placed around the extension cable to protect the detector cables from clamping when installed in a dynamic installation.
- 4m extension leads are available for all light curtain models E-series, Pana40+ and Panachrome.
Elmo Submersible Motor
Submersible electric motors for hydraulic lifts.
Visit Website: Elmo
ELSCO Accessories
Genuine Elsco roller wheels are the contractor’s best option for replacement parts for original Elsco equipment. No other aftermarket replacement roller offers the same combination of superior materials, precision engineering and quality control.
- Neoprene rubber roller wheels
- Precision ball bearings
- Eccentric wheel axle bolts
- Durable structural components
